Separate names with a comma.
RIP Jung Jae Sung Will remember how great your were whenever I use my JJS on court.
If the BG80 is too hard for you, you can consider NBG95.
For no. 2, no real rule really. This is personal preference and/or stringer recommendation based on their machine. Most people recommend +1 or...
As mentioned above, clamps will need cleaning after so many jobs so make sure this is part of your routine. To get similar tensions between...
1. Generally, assuming you used the same stringer, it is unlikely to be the change of string or racket. (I haven't used BG66 or BG66UM). Higher...
Hey, Anyone strung one of these before? Non-conventional head shape. Not sure if this can be done on a PS3600. [ATTACH] Thanks
I had a different but bad experience from the AliExpress seller. Both clamps that came fit the clamp base but the clamp surface was damaged. There...
Unfortunately, the Pro's Pro clamps do not do so well on thin or slippery strings. Either it slips or you tighten it too much the string gets...
Which main did the break occur? Did all three racket frames break near the same place? Did you inspect the racket for damage or cracks after the...
Do you know what tention you had the BG 66 Ultimax done at? Tighter isn't always better, in fact, it can go against you.
It differs by machine to a large extent. Find a ratio that works best for your machine after testing of course.
Kiss it everytime you make a great net kill, smile at it whenever you change the shuttle, blow it (handle) when it gets sweaty, stare at it when...
Here you go.
I used the MP99 years before switching to the Victor Meteor series, especially MX80. The MP99 is a more user friendly racket in my opinion and...
The MX80 and MX80N won't suit you at all, it is on the opposite end of the shaft stiffness scale. VT70 being flexy while the MX80 and MX80N being...
Maybe something like this? http://www.harborfreight.com/grommet-pliers-with-100-grommets-66707.html...
I recently received this racket for a restring. All strings have been cut and what's left are pieces of string for where a knot was made. Was...
A grommet flare tool
At big events, high end electronic machines are used so these likely do not need the extra lbs on the cross to keep the correct head shape. It has...
you can think about it in terms of friction. When you string the mains, the main thing that reduces tension are the grommets. Now consider the...